After I built my first King Island style kayak a few years ago, I realized that it had quite a few good features and would no doubt be a good boat for kayak replicators to build. However, the boat did not have any kind of reputation and people werent building too many of the King Island or for that matter, any other of the Bering sea kayaks. I was going to write something about this at the time but didnt. Then I got a call from Dave Wilhelm who makes King Island kayaks and we talked about how this kayak type is under-appreciated. You can read about Daves appraisal of the virtues of this kayak by following the link. Meanwhile, I will give you my theory of why some kayaks are more appreciated than others.
The reason is really quite simple. The Unangan kayak, or baidarka has a larger following than most of the Bering Sea kayaks because George Dysons book, Baidarka did a lot to propagandize it. George provides a lot of quotes from explorers who when first encountering these kayaks were impressed by their excellent performance.
Nobody has done this kind of promotion for the other kinds of Alaskan kayaks. David Zimmerly published the book Qajaq which shows plans for a number of Alaskan kayaks and he also did a book on the Hooper Bay kayak but unlike George Dyson, Zimmerly never did the kind of sales job that George Dyson did. And so, these boats remain underappreciated.
But some of the lack of Bering Sea kayak replication is also practical. Bering Sea kayaks are large volume kayaks made for carrying up to 900 pounds of gear. Most recreational kayakers do not need this kind of cargo capacity and the extra volume makes for a slower boat than one built to be paddled empty. Of course, the Bering Sea designs can be scaled down for recreational use, something that few people have done although Dave Wilhelm has moved in that direction and Skip Snaith and Sean Gallagher have as well and their efforts will no doubt popularize the type and put more of them out on the water.
This crack was not as bad as it looked. a couple of layers of glass set in epoxy on this side, backed up by a scrap piece of 1/4" ply set over release film and screwed in place created an almost invisible yet strong joint. Sad to say, I have had to do this process many times while building boats.
